How to remove harmonic balancer/ vibration damper on 1986 Ford F150 ?

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

This task will basically take Approx 2 hours to complete this wok.Also you will need a tool to do this:---
Its the puller to remove the damper.

The procedure is as follows :---

Remove the fan shroud. Remove drive belts from pulley.
Remove the vibration damper/pulley retaining bolt from the crankshaft end.
Using a puller, remove the damper/pulley from the crankshaft.
Upon installation, align the key slot of the pulley hub to the crankshaft key. Complete the assembly in the reverse order of removal. Torque the retaining bolts to the specifications.
This is detailed diagram to help you out:---

Directions are below:
Click image to see an enlarged view
Fig. Fig. 1: Vibration damper bolt removal

Click image to see an enlarged view
Fig. Fig. 2: Removing the pulleys from the damper

Click image to see an enlarged view
Fig. Fig. 3: Using a puller

Click image to see an enlarged view
Fig. Fig. 4: Lifting off the damper once it breaks free using the puller


This details will help.
For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.


The car will not start?


Car will not crank?


Car has no spark?


How to troubleshoot car battery?


How to test starter solenoid?



How to test cars starter?


How to replace starter in car?


car will turn over but will not start?


Car wont start?


No comments:

Post a Comment