printer drivers?

The first thing that you will need to install a printer is a driver software. If you have misplaced the original printer disk you can download the drivers from the manufacturer's website.

Click the link below.

Here driver download pages for different printer manufacturers: :
HP Software, Drivers Support


Official Canon Drivers and Software


Epson Driver Download

Brother Software Download

Olivetti Printers Plotters Drivers Download

Support & Drivers Search Page | Konica Minolta

Xerox Online Xerox support

Dell Drivers and Downloads

KODAK: Drivers, Software and Firmware

Zebra Drivers & Downloads

OKI Drivers

DYMO | Support

If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software


After downloading is finished, unplug the printer USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

Some Canon printers are not Vista compatible and cannot work on Vista.
If printer is Canon, select the OS version in the box and scroll down Canon page to find the download link.

If you have a Lexmark printer, see:

Lexmark does not distribute replacement install disk for all models.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:some printerdoes not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

No comments:

Post a Comment