@

max

Saturday

how to replace front headlams on Toyota Camry Vientia Grande?

If you are changing the bulbs, lift the hood, unplug the back of the light (there's a huge plug lookin' thing) usually requires a screwdriver because there's a point you need to depress to get the plug to release...pull the back of the headlight cover off (screwdriver depressed plastic points or tiny screws depending on the model)...pull out the old bulb and put the new one in.

If you are replacing the entire assembley, unplug it and pull the whole thing out (involving screws or depressed plastic points...use a flathead screwdriver on those) and replace.
  • Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off.

  • Open the hood using the primary and auxiliary hood release latches.

  • Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced.

  • Turn the headlight bulb socket counterclockwise to remove it from the assembly.

  • Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.

  • Attach the electrical connector to the new bulb and insert it into the headlight assembly. Twist it clockwise to secure its position.

  • Test the new headlight to make sure it works before closing the hood.

    ---------

    There is a good video showing how to replace headlight on Toyota camry :--- Click the link below:---

    http://www.youtube.com/watch?v=8ap1-CzG5Hc

    ---------

    Also to get parts related to your headlight or any other car related part.

    To Order car parts online:--To get heavy discount on car parts .Click this link below:----

    http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html

  • No comments:

    Post a Comment

    @