@

max

Thursday

Oil Pan Replacing on Dodge Dakota?

The complete step by step procedure to remove/ install oil pan.
The details for Dodge Dakota models.

The oil pan replacing is as follows :-----

3.7L Engine
  1. Remove or disconnect the following:

    Engine from the vehicle
    Oil pan
    Oil pump pickup tube
    Oil pan gasket
  2. Installation is the reverse of removal. Torque the bolts, in sequence, to 11 ft. lbs. (15 Nm). 

    image
    Fig. Oil pan bolt torque sequence-3.7L Engine
4.7L Engine
  1. Drain the engine oil.
  2. Remove or disconnect the following:

    Negative battery cable
    Structural cover
    Exhaust Y-pipe
    Starter motor
    Transmission oil cooler lines
    Oil pan
    Oil pump pickup tube
    Oil pan gasket
To install:
image
Fig. Oil pan mounting bolt tightening sequence-4.7L engine


image 
Fig. Bedplate bolt tightening sequence-4.7L engine
  1. Install or connect the following:

    Oil pan gasket
    Oil pump pickup tube, using a new O-ring. Tighten the tube bolts to 20 ft. lbs. (28 Nm); tighten the O-ring end bolt first.
    Oil pan. Tighten the bolts, in sequence, to 11 ft. lbs. (15 Nm).
    Transmission oil cooler lines
    Starter motor
    Exhaust Y-pipe
    Structural cover
    Negative battery cable
  2. Fill the crankcase to the proper level with engine oil.
  3. Start the engine and check for leaks.

These details will help.
Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


No comments:

Post a Comment

@