Wiper/Washer Switch:
The details are as follows :----
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0900c152/80/08/c0/60//small/0900c1528008c060.jpg)
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0900c152/80/08/c0/61//small/0900c1528008c061.jpg)
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
The details are as follows :----
REMOVAL & INSTALLATION
- Disable the air bag system.
- Remove the lower panel of the dashboard, the knee bolster and/or the steering column covers, as necessary for your vehicle.
See Figure 1
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0900c152/80/08/c0/60//small/0900c1528008c060.jpg)
Fig. Fig. 1: The upper and lower cover must be removed to access the switch
- Disconnect the harness by gently depressing the tab on the connector and pulling.
See Figure 2
![Click image to see an enlarged view](http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0900c152/80/08/c0/61//small/0900c1528008c061.jpg)
Fig. Fig. 2: Typical wiper/washer switch location.
- Unfasten the wiper switch mounting screws, then remove the switch.
- Installation is the reverse of the removal procedure.
- Enable the air bag system.
This will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment