How to remove control panel on Buick regal?

The details to remove take apart control panel is as follows :----

  1. If necessary for access to the negative battery cable, remove the air cleaner and duct assembly.
  2. Disconnect the negative battery cable.
  3. Remove the instrument panel trim plate.
  4. Unfasten the screws securing the control assembly to the dash.
  5. Pull the control assembly away from the dash, detach the electrical connections, then remove the control assembly from the vehicle.
To install:
  1. Attach the control electrical connections.
  2. Position the control assembly and secure using the attaching screws. Tighten the screws to 13 inch lbs. (1.5 Nm).
  3. Install the instrument panel trim plate.
  4. Connect the negative battery cable.
  5. If removed, install the air cleaner assembly.

See Figure 1
Fig. Fig. 1: Automatic A/C control assembly removal-1995 vehicle shown

This will help.

See below latest solved car problems :----

HVAC Control panel has no power on 2000 lincoln navigator?


Car instrument cluster has no power?

How odometer works in cars?

How to trouble shoot speedometer?

1996 fiat bravo speedometer not working?


Speedometer works but odometer not working?


Speedometer runs backward?

Warning lights on and speedometer died?

ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

Vehicles Cluster panel Not reading Miles?

Odometer works properly but speedometer works intermittently?


Dodge neon gauges not working?

No comments:

Post a Comment