Instrument Panel Insulator Panel Replacement - Right Side
Remove the push-in retainers from the IP insulator to instrument panel.
Remove the press-on retainers from the IP insulator to dash mat.
Unsnap the IP courtesy lamp from the IP insulator.
Remove the IP insulator from the instrument panel.
Remove the right side instrument panel insulator.
Disconnect the electrical connector from the blower motor.
Remove the blower motor mounting screws.
Remove the blower motor from the HVAC module assembly.
Now there you will see the HVAC module holding screws.Remove the screws and module should be out.------------------
just a trim panel under the passengeer side of the dash really.
Important: Only loosen both of the forward blower resistor assembly mounting screws. The blower motor resistor assembly mounting holes are slotted.
AND beside there youb will see the screws to be removed for HVAC module.-------
No comments:
Post a Comment