tag:blogger.com,1999:blog-73815729510197505.post6148449628356835344..comments2024-03-27T08:03:02.382-07:00Comments on HowToRepairGuide.com: IPM and FCM module inspection on 2005 Chrysler Town n CountryHemant somaiyahttp://www.blogger.com/profile/18016566271529857503noreply@blogger.comBlogger2125tag:blogger.com,1999:blog-73815729510197505.post-89682936866111440112020-02-18T09:24:27.611-08:002020-02-18T09:24:27.611-08:00I did the brake light test. Found the center upper...I did the brake light test. Found the center upper bulb to be out. Replaced and tested, all brake lights work properly. Checked fuse and found it to be fine, removed fused and tested brake lights and they did not work with fuse removed. reinstalled and brake lights worked properly.ecs2711https://www.blogger.com/profile/07049389464086067506noreply@blogger.comtag:blogger.com,1999:blog-73815729510197505.post-60534144324805553932020-02-18T08:01:57.126-08:002020-02-18T08:01:57.126-08:00On my 2005 Town and Country my instrument panel ga...On my 2005 Town and Country my instrument panel gauges do not work. All back lights work but not the mileage or gear indicators. All other electronics work. Vehicle starts with and without instrument cluster installed. I have also replaced the cluster and the replacement has the same issues. Is there a particular wire I should test. I have power at pins 1,6 and ground continuity at pin 13. door ecs2711https://www.blogger.com/profile/07049389464086067506noreply@blogger.com