P1495 Leak Detection Pump Solenoid Circuit?

The error code P1495 indicates issue with leak detection pump.The emission system needs to be inspected.
The leak detect pump, part of the Evaporative Emissions Control System (EVAP).
It  is mounted under the van on the suspension crossmember slightly to the drivers side.
Another thing to be inspected is PCM.The Powertrain Control Module (PCM) is mounted next to the battery against the drivers side fender wall.
Both this parts needs to be checked.
The problem lies between those two components and the wiring between. Most of the time the pump needs to be replaced but not always.
It's also recommended to inspect the wiring at the pump and PCM for anything amis. Reset the code either with a scanner or by disconnecting the negative battery lead for a few minutes.
If it returns head to a transmission shop and have them check for transmission specific codes with their specialised transmission scanner. When was the fluid and filter changed last. That could be another good first step. As for the P1495. Disconnect the negative battery cable for a few minutes to reset the code and see if it comes back.

This details will help.

For All types of Car models and brands help 
Go to Newly Launched

FREE Car repair guide? 

Complete Car repair Help FREE? 

No comments:

Post a Comment