@

max

Monday

How to remove brake pads on 2001 Lexus?

Basic brake pads removal procedure:---

Brake Pads


Removal & Installation



Front & Rear
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:

    Wheels
    Lower installation bolt
    Caliper and suspend it securely. Do NOT disconnect the fluid line.
    Brake pads and retainers
To install:
  1. Install or connect the following:

    2 pads so that the wear indicator plate is facing upward. Do NOT allow oil or grease to get in the rubbing face.
  2. Draw out a small amount of brake fluid from the brake reservoir. Press in the caliper piston with a suitable tool.

    Caliper. Torque the sliding main pin to 25 ft. lbs. (34 Nm).
    Wheels
  3. Check the fluid level in the master cylinder and add as necessary.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove the wheels.
  3. Remove the lower installation bolt.
  4. Lift up the caliper and suspend it securely.
  5. Remove the brake pads and retainers.
To install:
  1. Install the 2 pads so that the wear indicator plate is facing upward. Do not allow oil or grease to get in the rubbing face.
  2. Draw out a small amount of brake fluid from the brake reservoir. Press in the caliper piston with a suitable tool.
  3. Lower and install the caliper. Torque the sliding main pin to 25 ft. lbs. (34 Nm).
  4. Install the wheels.
  5. Check the fluid level in the master cylinder and add as necessary.




2 comments:

  1. I think checking your car brake pads on regular bases is important. checking your car brake pads on regular bases gives you good idea about brake pads life.
    Chine brake pads
    http://asimcoglobal.com/

    ReplyDelete
  2. Nice post! This is a very nice blog that I will definitively come back to more times this year! Thanks for informative post. Oil Change service

    ReplyDelete

@